Product Details
I. Introduction
● Metal pipe and tube laser cutting machine with 2000w fiber laser source.
● Maximum cutting wall thickness 15mm carbon steel, 10mm stainless steel, 8mm aluminum, 5mm brass, 5mm copper.
● Cutting pipe & tube of round, square, rectangular, oval, waist round metal, etc.
● Standard Φ=20mm~200mm, L=6m.
● Pipes length longer than 6m and diameter more than 200mm, machine can be customized.
II.Laser Cutting Pipe Type
Round Tubes and Hollow Section Cutting Capacity Min: 16mm Ø Max: 273mm Ø | |
Square Tubes and Box Cutting Capacity Min: 16mm x 16mm Max: 200mm x 200mm | |
Rectangular Tubes Cutting Capacity Min: 20mm x 15mm Max: 250mm x 150mm | |
Oval/Elliptical Tubes Cutting Capacity Min: 32mm x 17mm Max: 250mm x 125mm |
III.Cutting Thickness Limit
Material | Cutting Thickness Limit |
Carbon steel | 15mm |
Stainless steel | 10mm |
Aluminum | 8mm |
Brass | 5mm |
Copper | 5mm |
IV.Speed Chart
Thickness | Carbon Steel | Stainless Steel | Aluminum |
O2 | Air | Air | |
1.0mm | 450mm/s | 400-450mm/s | 300mm/s |
2.0mm | 120mm/s | 200-220mm/s | 130-150mm/s |
3.0mm | 80mm/s | 100-110mm/s | 90mm/s |
4.5mm | 40-60mm/s | ||
5mm | 30-35mm/s | ||
6.0mm | 35-38mm/s | 14-20mm/s | |
8.0mm | 25-30mm/s | 8-10mm/s | |
12mm | 15mm/s | ||
14mm | 10-12mm/s | ||
16mm | 8-10mm/s |
V. Main Parts
Article Name | Remark |
Fiber laser resonator | 2000W (IPG) |
Servo motor and driver | YASKAWA (Japan) |
Ball screw rod | HIWIN (Taiwan) |
Gear rack | CHINESE |
Laser head | RAYTOOLS (Switzerland) |
Chiller | TONG FEI (China) |
Control system | PA8000 (GERMANY) |
Liner guide | HIWIN (Taiwan) |
Gas Proportional valve | SMC (Japan) or AIRTAG |
Reduction gear box | MOTOVARIO (France) |
Machine metal body | 16-25MM BED MADE FROM WHOLE SHEET WITH HEAT AND RELEASE TREATMENT |
VI.advantages
1. Automatic centering pneumatic chuck made by LGmazak and HAAS.Accuray and quality are guaranteed. Other suppliers buy ready-make electrical chucks which are easy to break in practice.
2. Manual or automatic loading from back of machine—patent design.15-20s back loading time then 60s loading time from side
3. Germany original PA8000 control system. Other suppliers use Cypcut or Higerman. We have professional nesting software for angle and channel steel cutting.
4. The N.W. of our machine bed is 5t, made of 16-25mm whole sheet of steel with heat and release treatment. Others use welded steel tube machine bed.
VII. SAMPLES
Previous: CNC Laser Pipe Cutting Machine
Related Products
Inquiry