1000W Pipe Laser Cutting Machine

Video for 1000W Pipe Laser Cutting Machine

Picture for 1000W Pipe Laser Cutting Machine

Product Advantages of 1000W Pipe Laser Cutting Machine

• The 120mm high-speed chuck is 200 revolutions per minute, which can realize fast cutting, and can clamp square tubes less than 120mm etc., which can fully meet the pipe processing needs of the school tool industry.
• The standard system is efficient, stable and easy to operate.
• Self-developed tailing treatment method with short tailings.
• The laser head is installed on the welded integrated gantry, and the guide rail screw rod is durable, and the cutting error is low!
• A total of dozens of feet are installed under the one-piece bed, the bed is stable, and the cutting accuracy is high.
• The nesting software can realize the cutting of special-shaped pipes, I-beams, channel steels, and other pipes, and the precise layout and reasonable use of pipes can save tailings to the greatest extent.
• Optional front splicing is supported by a group of nylon wheels, which can realize 3m length cutting.

Technical Parameters for 1000W Pipe Laser Cutting Machine

School Equipment Industry for 1000W Pipe Laser Cutting Machine

Compared between the traditional processing machines & tube laser cutting machines.

The disadvantages of traditional processing machines:

• There are large burrs in the incision of the saw pipe.
• The deformation of the punching machine has burrs. And the diameter of the different tubes needs to be replaced with different molds.
• The update of calibration tools is fast and multiple sets need to be updated every year. The price of the mould ranges from several thousand to tens of thousands. The cost is very higher.

Advantages of ACME Tube Laser Cutting Machine:

• The incision of the laser pipe cutting machine is smooth and burr-free, without deformation.
• The original processing steps required three processes and three workers to cooperate to complete, now only one laser pipe cutting machine can be processed easily. The production efficiency increased by 2 times.
• The original pipe punching machine with different sizes needs to re-open the mould and the cost is high. Now, the operators only need to make the drawing then to cut and can not need to make new mould, which can save many costs.