ACME Three-Chuck Tube Laser Cutting Machine Is Ready for Ship!
a. It's equipped 3 moveable chucks, let laser head can cutting at the tube end, achieve 0 tube tailing,
b. It's also suitable to process long finished parts.
c. Tube Length can be 6m, 8m, 9m, 10m, and 12m etc.
d. Tube Diameter can be 120mm, 170mm, 250mm, 350mm etc.
Cutting Process
After the pipe is loaded (feeding mechanism or manual), it is clamped by the A chuck and the B chuck, the laser head performs standard cutting in the cutting area, and the A chuck feeds forward. Rear chunk Feeding area Operation area Laser head Front chunk Control cabinet Middle chunk
2. After half of the pipe processing is completed, the C chuck clamps to prevent the pipe from extending too long and swinging.
3. When cutting to the end of the pipe, the A chuck is released and returned to prepare for the next feeding. The B chuck moves from the left to the right of the cutting area and then performs tail cutting.
4. After the cutting is completed, the BC two chucks are released and returned, and the parts are cut by the supporting plate.
